The JX-TF-RMS testing system is mainly used for laboratory testing schemes. It follows the EPC Class1 Gen2 standard and has complete tag performance analysis capabilities. It is used to test the resonant frequency point, minimum activation power, and load modulation size of the designed label, analyze the factors that affect tag performance, and determine improvement directions. Provide test data such as forward sensitivity, reverse sensitivity, forward distance, and reverse distance.

Technical Performances:

The host can be tested independently and can also be connected to a PC for synchronous testing;

PC software automatically saves test data;

You can choose to save 5 types of test curve graphs;

Supports frequency range of 800MHz-1000MHz (expandable),

Pre reading of tags can be performed to avoid interference from non test labels;

Continuous scanning can be performed for comparative testing;

Configure calibration labels and standard foam brackets;

Equipped with small tag test antenna;

Standard testing software, permanently free upgrade.

Technical Parameters:

Screen size: 7 inches;

Resolution: 1024 * 600;

Antenna size: 220 * 220 * 24mm;

Sweep frequency step size: 2MHz, 5MHz, or 10MHz;

Starting power: adjustable within the range of 0-30dBm;

Power step: adjustable at 0.1dBm, 0.2dBm, 0.5dBm, and 1dBm;

Frequency range: 800MHz~1000MHz;

Input power supply: 12V;

Body material: Aluminum alloy+ABS;

Communication interface&charging port: USB.