RF PROSECOUTOR 890PRO is a specialized equipment for RFID label production testing automation, mainly used to test the consistency of UHF label performance. It can complete the detection of up to four frequency points at once and can complete the label consistency test of two frequency points within 14ms, while generating log documents.Suitable for use with: composite machines, flip chip machines, and testing platforms.
Technical Performance:
Support power adjustment range of -25 to 25dBm;
Power adjustment step of 0.25dB;
Supports frequency range of 840-960MHz;
Support label consistency testing for up to 3 frequency points;
Support label consistency+TID combination testing;
The fastest time to complete the 2-frequency label consistency test is within 14ms;
GPIO signal triggers reading of 96 bit EPC+96 bit TID, with a maximum speed of 15ms/time;
Continuously read 96 bit EPC+96 bit TID, up to 8ms/time at the fastest;
Support external jitter triggered label filtering function;
Support external triggering of NPN and PNP rising or falling edges;
Can output test PASS/FAIL signals;
Supports network port or RS232 serial communication methods.
Technical Parameter:
Input voltage：12V～24V;
Peak current：700mA;
Frequency range：840MHz～960MHz;
Power range：-25～25dBm;
Step interval：0.25dB;
Label consistency testing：8/14ms;
Continuous label reading speed：8ms;
GPIO Signal triggered label reading speed：15ms;
Label RSSI：support;
Antenna interface：N-K (outer screw inner hole) female head;
Communication interface：GPIO IN*4,GPIO OUT*4,LAN口，RS232;
Weight：2000g;
Size：275mm×290mm×110mm;
Body material：Aluminum alloy;
Contact discharge：±8kV.
